In wall closet storage solution
This project was a solution to the problem of limited space in a small closet. To solve the problem we cut a hole in the wall, which had empty attic space behind it. A custom cabinet was built using birch plywood and pocket screws. It was faced off with 1×2 finger joint pine. The cabinet was installed in the wall and drawers were then built and installed into the cabinet. This application used under-mount soft close drawer glides which deliver a very smooth open and they have a special piston built in to slow the cabinet drawers from slamming, even if they are pushed shut forcefully; The glides gently stop the motion of the drawer and then slowly continue until they have successfully shut the drawers.
To check out other storage solutions please click the link below